Posts Tagged ‘outdoor cooling’

Design your high pressure misting system in zones for maximum versatility.

Sunday, April 10th, 2011

When designing a high pressure misting system consider setting the system up in zones that can be independently turned on or off. We carry manual high pressure shut-off valves as well as high pressure misting solenoid valves. The electrical misting valves can be operated by a simple switch or can connected to and controlled by various automation systems. You may want too for example, turn off the misting nozzles on the patio section while leaving the fog effects for a waterfall left on. We can help you design your entire system so contact Outdoor Cooling Systems for expert assistance in creating a high pressure misting system that will best meet your needs. We carry a complete line of high pressure misting nozzles, misting pumps, nylon mist tubing, stainless steel misting tubing and everything you need to install a professional misting system.

See our misting gallery or our misting videos to see some of our work.

outdoorcooling.org

Mist Fans or Mist Line?

Tuesday, March 30th, 2010

When choosing a mist cooling system, one has to decide whether to use mist fans, mist line or a combination of the two.

Our high pressure misting fans evaporate 100% of the mist and circulates the air to provide maximum cooling. It is not uncommon to see temperature drops of 16-25 degrees! Mist cooling fans are the most effective way to cool an area!

If electrical outlets for the fan are not nearby or if you would prefer not to see a mist cooling fan than mist line or misting stakes are for you.

Stainless steel mist tubing or nylon mist tubing is usually installed along the outside perimeter of covered patios, awnings, gazebos etc. A high pressure mist cooling system evaporates the tiny water droplets in the air cooling the air without getting anything wet. This causes a curtain of cool air surrounding you.

No structure, no problem. High pressure mist cooling/fog effects stakes can be hidden in landscaped areas. When a perimeter of high pressure mist is created around an area, no matter which way the wind blows, the cool air will move through the target area. When there is no wind the air will mix and still cool the target area.

Feel free to contact Outdoor Cooling Systems with questions if you are

Spring is here and maintenance of your mist cooling system is critical.

Friday, March 19th, 2010

Maintenance of high pressure mist cooling systems will help you get the most out of your system and prevent many common problems. High pressure mist cooling systems require excellent filtration to protect your pump and prevent the nozzles from getting clogged. Mist cooling systems should also be flushed when the filters are replaced. Many high pressure misting pumps required periodic oil changes, the time between oil changes can vary from manufacturer to manufacturer. Feel free to ask any questions you may have if you are planning to do the maintenance yourself.

Or call now to schedule you preventative maintenance.