Comments for outdoorcooling.org Blog

Comment on Got Outdoor Cooling Questions? by Rodrick Jiron

Rodrick Jiron — Mon, 21 Feb 2011 21:45:52 +0000

Great post! I love it very much!

Comment on Ruby mist nozzles are here! by Don Adams

Don Adams — Mon, 07 Feb 2011 20:02:20 +0000

Please give me your contact. I need to buy quantities of ruby nozzles 1-806-995-3282 P.O. Box T Tulia Texas 79088 USA

Comment on Double Ferrule Compression Fittings by Bobbie Gomora

Bobbie Gomora — Thu, 20 Jan 2011 06:53:56 +0000

I am very thankful to this topic because it really gives up to date information :`*

Comment on Ruby mist nozzles are here! by Administrator

Administrator — Thu, 28 Oct 2010 12:25:23 +0000

Our nozzles have a very fine orifice from .004″ to .020″, the orifice will get clogged if adequate filtration is not provided. These nozzles are easy to clean though. Our nozzles have 10/24 thread, is that what your old nozzles are?

Comment on Ruby mist nozzles are here! by Len Hobson

Len Hobson — Thu, 28 Oct 2010 08:12:35 +0000

I am looking for misting nozzles to replace the Dansk Gardner Technick nozzles. they have gone out of business. The nozzle has a pin in the orifice that lets dirt through and gives a wide spread as the drops are courser

Comment on Ruby mist nozzles are here! by Len Hobson

Len Hobson — Thu, 28 Oct 2010 08:11:21 +0000

Comment on Mist Fans or Mist Line? by nfl jerseys

nfl jerseys — Thu, 16 Sep 2010 03:18:28 +0000

nice share, good

article, very usefull for me…thank you

Comment on Mist Fans or Mist Line? by hockey jerseys

hockey jerseys — Thu, 16 Sep 2010 00:44:04 +0000

Great article Thank

you so much!

Comment on Got Outdoor Cooling Questions? by Administrator

Administrator — Thu, 06 Aug 2009 13:20:49 +0000

Hi Eric,

If you use only municipal water pressure to run your system not only will everything get wet but there won’t be enough evaporation taking place to cool the air. Most of the water droplets are so large the fall to the ground without evaporating.

High pressure mist cooling systems (800-1000PSI) are designed to atomize the water so that it flash evaporates in the air. When the evaporation takes place, the heat energy is absorbed and the temperature is reduced!

That being said, boosting the pressure of a low pressure mist system could make matters worse because the nozzles are designed for low pressures and therefore have larger orifices. This could cause the area to get extremely wet.

You could also consider purchasing our 3/8″ high pressure tubing, nozzles and fittings and using them at lower pressures. This would give you the option of upgrading it to a high pressure system in the future if you wanted to.

Please let us know if you have any more questions.

Comment on Got Outdoor Cooling Questions? by Eric

Eric — Thu, 06 Aug 2009 03:53:02 +0000

Hi,

I was thinking of setting up an outdoor cooling system. I have a 10 x 10 canvas tent and was going to buy a kit that is supposed to fit this system. I was just going to hook it up to my garden hose but have been reading that the low pressure in the municipal water system would make things quite wet instead of the cooling effect we are looking for. Would you recommend a pump to boost this to at least 160 psi, what I’ve read would be a medium system or have you had experience just with the garden hose and it works out ok.

You advice would be appreciated.

Best Regards,
Eric